A winding machine is used for wrapping string, twine, cord, thread, yarn, rope, wire, ribbon, tape, etc. onto a spool, bobbin, reel, etc. Winders are used heavily in textile manufacturing, especially in preparation to weaving where the yarn is wound onto a bobbin. Ball winders are another type of winder that wind the yarn up from skein form into balls. Ball winders are commonly used by knitters and occasionally spinners.

Winders have a center roll (a bobbin, spool, reel, belt-winding shell, etc.) on which the material is wound up. Often there are metal bars that travel through the center of the roll, and are shaped according to their intended purpose. A circular bar facilitates greater speed, while a square bar provides a greater potential for torque. Edge sensors are used to sense how full the center roll is. They are mounted on adjustable slides to accommodate many different widths, as the width increases as the center roll is filled. The sensitivity of the sensor depends on the required speed of operation.

Auto winding machine series

WCE – 801

WCE – 802

WCE -801F

WCE – 802F

Features :-

  1. Suitable for mini transformer, power supplier transformer, relay high voltage ignition coil and exchangable power supply transformers manufacturing etc.
  2. Easy setting and high precision of spreading control.

WCE -806F    CNC Automatic winding Machine.

Features;

  1. Suitable for mini transformer, power supplier transformer, relay, high voltage ignition coil and exchangable power supply transformers manufacturing etc.
  2. Easy setting and high precision of spreading control.

WCE – 801LTA / WCE – 801LTB  Digital large torque winding Machine.

Features:

  1. Ideal for high and low vo;tage transfer and large transformer.
  2. Suitable for wire size maximum to 3.0mm.
  3. Machine can be refitted to ground type.
  4. Can be customized design and order made with a feature for maximum 400mm spread width.

 

[contact_bank form_id=1]