Soldering Machines is used in the manufacture of printed circuit boards. The circuit board is passed over a pan of molten solder in which a pump produces an up welling of solder that looks like a standing wave. As the circuit board makes contact with this wave, the components become soldered to the board. Wave soldering is used for both through-hole printed circuit assemblies, and surface mount. In the latter case, the components are glued onto the surface of a printed circuit board (PCB) by placement equipment, before being run through the molten solder wave.

As through-hole components have been largely replaced by surface mount components, wave soldering has been supplanted by reflow soldering  methods in many large-scale electronics applications. However, there is still significant soldering where surface-mount technology (SMT) is not suitable.

There are many types of soldering machines however, the basic components and principles of these machines are the same. The basic equipment used during the process is a conveyor that moves the PCB through the different zones, a pan of solder used in the soldering process, a pump that produces the actual wave, the sprayer for the flux and the preheating pad. The solder is usually a mixture of metals.

 

WCE – 06 :-  Six Stations Auto Dip Soldering Machines.

      Features :-

  1. Applicable for horizontal or vertical coil or relay component soldering work.
  2. Auto dross clean, free adjustable for soldering height, programmable setting for daily or weekly production schedule.
  3. Heater pipe is a single unit and can be easily exchange & maintenance.
  4. Two times solder per cycle, timer setting for dipping (solder cup raise up).
  5. Adopted with titaium solder pot, sustains high temperature. Max 6000C.
  6. Addable testing or pressing function for DC fan coil or FBT low V coil.
  7. For relay, pin bending and 900 bend back can be added.

 

WCE – 04E :-  Four Stations Auto Dip Soldering Machines.

Features :-

  1. Applicable for horizontal or vertical coil or relay component soldering work.
  2. Auto dross clean, free adjustable for soldering height, programmable setting for daily or weekly production schedule.
  3. Heater pipe is a single unit and can be easily exchange & maintenance.
  4. Two times solder per cycle, timer setting for dipping (solder cup raise up).
  5. Adopted with titanium solder pot, sustains high temperature. Max 6000C.

 

WCE – 03VB :-  Fully Auto Dip Soldering Machines (Vibrator Bowl Type)

Features :-

  1. Applicable for horizontal or vertical coil or relay component soldering work.
  2. Fully automatic feeding material, flux dipping, dip soldering and unloading.
  3. Twin vibrations bowl that allows two different kind of products be simaltinously loaded and soldered.
  4. Programmable angle rotation for dip soldering.
  5. Allowed custom designs according to customer’s special soldering request and specifications.
  6. Functional, stable, high efficiency, labour cost saving and simple operation.

 

WCE – 03CB :-  Fully Auto Dip Soldering Machines (Conveyor Belt Type)

Features :-

  1. Applicable for horizontal or vertical coil or relay component soldering work.
  2. Fully automatic conveyor feeding material, flux dipping, dip soldering and unloading.
  3. Different types of products may only need to manually adjust the bezel of conveyor for compatible feeding, no extra fixture or mold required.
  4. Programmable angle rotation for dip soldering.
  5. Allowed custom designs according to customer’s special soldering request and specifications.
  6. Functional, stable, high efficiency, labour cost saving and simple operation.

 

WCE – 02R :-  Auto Dip Soldering Machines (Choke & SMD)

Features :-

  1. Free selectable for any angle soldering process.
  2. Adopted with CNC controller system, it can stores upto 99 sets of memory, each memory can be set upto 10 parameters memory harmony with stepping motor.
  3. One programe can position 3 steps function, each step can have a setting for : (A) Angle Setting. (B) Dropping Height Setting. (C) Pre Heat Time Setting.
  4. For horizontal coil, angle one side position for solder, than angle other side for solder, than parallel, finally dragging soldering.
  5. Equipped with titanium solder pot, temperature control, reduce tin oxidation.
  6. And heater pipe is a single unit and can be easily exchange for maintenance.

 

WCE – 02R PLC :-  PLC Auto Dip Soldering Machines (Choke & SMD)

Features :-

  1. Free selectable for any angle soldering process.
  2. Adopted with PLC controller system, it can stores upto 99 sets of memory, each memory can be set upto 10 parameters memory harmony with stepping motor.
  3. One programe can position 3 steps function, each step can have a setting for : (A) Angle Setting. (B) Dropping Height Setting. (C) Pre Heat Time Setting.
  4. For horizontal coil, angle one side position for solder, than angle other side for solder, than parallel, finally dragging soldering.
  5. Equipped with titanium solder pot, temperature control, reduce tin oxidation.
  6. And heater pipe is a single unit and can be easily exchange for maintenance.

 

WCE – 02 LA :-  CNC In- Line Auto Dip Soldering Machines

Features :-

  1. Applicable for horizontal or vertical coil or relay component soldering work.
  2. Adopted with CNC controller system, it can stores upto 1000 parameters memory harmony with stepping motor.
  3. Auto dross clean, free adjustable for soldering height.
  4. Heater pipe is a single unit and can be easily exchange & maintenance.
  5. Adopted with titanium solder pot, sustains high temperature. Max 6000C.

 

WCE – 02 AF:-  Auto Flux and Dip Soldering Machines

Features :-

  1. Applicable for horizontal or vertical coil or relay component soldering work.
  2. Adopted with CNC controller system, it can stores upto 1000 parameters memory harmony with stepping motor.
  3. Auto dross clean, free adjustable for soldering height.
  4. Heater pipe is a single unit and can be easily exchange & maintenance.
  5. Adopted with titanium solder pot, sustains high temperature. Max 6000C.

 

WCE – 02 K :-  Auto Dip Soldering Machines (Fixture down Soldering)

Features :-

  1. Applicable for horizontal or vertical coil or relay component soldering work.
  2. Auto dross clean, free adjustable for soldering height.
  3. Heater pipe is a single unit and can be easily exchange & maintenance.
  4. Adopted with titanium solder pot, sustains high temperature. Max 6000C.
  5. Temperature control, reduce tin Oxidation.

 

WCE – 01 R :-  Auto Dip Soldering Machines (180* Flip Rotate Fixture)

Features :-

  1. Best for complicated and over sized transformer soldering.
  2. Applicable for horizontal or vertical coil or relay component soldering work.
  3. Auto dross clean, free adjustable for soldering height.
  4. Heater pipe is a single unit and can be easily exchange & maintenance.
  5. Adopted with titanium solder pot, sustains high temperature. Max 6000C.
  6. Temperature control, reduce tin Oxidation.

 

WCE – 03 A/B/C/E/H/K :-  Land Free Titanium Dip Solder pot ( Porcelainized Crucible Coating)

Features :-

  1. Heater pipe is a single unit and can be easily exchange & maintenance.
  2. Lead free titanium solder pot, sustains high temperature. Max 6000C.
  3. Temperature control, reduce tin Oxidation.
  4. Available for standard types or specified inner bath dimension.

 

 

[contact_bank form_id=1]